TETRÁL LineTETRÀL Une is the linear solution of Tetral b aluminium ceiling system, made up of modular panels which are fully downward demountable.
With thin and very decorative "U"-shaped lines, 5 or 10 mm wide, this product features parallel profiles hold by upper support bridges which placed over the panel will disappear when looking across the ceiling.
Provided in two variations, TETRÀL Line b5 and TETRÀL Line b10, it is the perfect solution for every project requiring exclusive design.
TETRÀL Une features 1200x600 mm modular panels, made of "U" blades with a base of 5 or 10 mm and height of 30/40 mm, which can be spaced at any interval (pitch) from 15 mm.
The modular panels, 1200x600 mm, are suspended from the concealed Delta suspension system. Upon request, special modules are available: width up to 1200 mm length up to 2400 mm (b5) and 1800 mm (b10).
TETRÀL Une blades are made by BENDING SYSTEM, which gives: the accuracy of profiles, more square edges and blades perfectly straight.
TETRÀL Une can be supplied either plain or perforated, to achieve aesthetic and acoustic requirements. Standard perforation patterns are as follows:
hole Ø 1,50 mm, 22% free opening, 3 mm pitch
hole Ø 2,50 mm, 19% free opening, 5 mm pitch.
A wide range of finishes either from pre-painted or post-painted aluminium is available, according to the RAL, NCS, PANTONE and SIKKENS colours.
HINGE-DOWN PERFECT ANO EASY
Each panel is fully downward demountable and can remain hinged-down in the springs without being totally removed. The panels swing down from the short side (600 mm) and remain suspended at full length. Upon request, hinge-down from the long side (1200 mm) is possible too.
TETRÀL Une is usually supplied unassembled. It allows for easier packages and more economie transports. Upon request, the panels can al so be supplied assembled.
CEIR open celi ceilings are classified incombustible in compliance with international standards.
The concealed Delta suspension system allows for easy and fast placement or removal of TETRÀL Une. The suspension system gives a trackless appearance and allows for demounting of the panels from below. The minimum free space required for comfortable demounting is 80 mm only.
» Mounting system
Do you like this product? Are you interested in more information about it? Ask any question, large or small: click here. We're happy to answer all questions personally and promptly.
via Marconi n.3
35030 Caselle di Selvazzano
Phone +39 049.630.779
Fax +39 049.632.254
|Home - About us - Products - Mounting Systems - Materials - Finishes - Additional Info - Download - Contact us||Site map - Privacy|
© All right reserved - DevB Nettamente